Model Number: PLA&ABS-14-12
Brand Name: MT
Key Specifications/Special Features:
Specifications:Product: HIPSDiameter: 1.75 or 3.00mmThe tolerance roundness range: 1.65-1.76, 2.85-3.05mmExtrusion temperature range: 230-270°C
Bottom plate temperature range: 70-100°C
Colors: white, black, orange, yellow, red, pink, purple, grey, blue, gold, flue-green, flue-blue
Diameter:- The tolerance roundness extruder temperatures, bottom plate temperatures weights:
- 1.75mm 1.65-1.76mm 230-270°C 70-100°C 1kg/spool
- 3.00mm 2.86-3.05mm 230-270°C 70-100dC 1kg/spool
Production control:
- Before producing extruding filament, we will dry ABS and PLA for a enough time (3 to 5 hours)
- Mix it with colors master batch or colors powder, all which certified with RoHS
- Adjust temperature and dragging rate, make filament diameter range at 1.6 to 1.8/2.8 to 3.0mm, roundness ±0.05mm, each spool net weight 1±0.02kg
- We put all filament spool in shelf, different kind in different shelf, all categories arranged orderly
About waste and recycle:
- Much time you will find some black filament is too brittle, that is added and mixed with some recycle and scrap after being produced
- We haven't produced with scrap outlet, rework and recycle material, or dispose, but for quality assurance purpose
Packaging:
- We put each filament/spool on seal PE bag with desiccant, then smaller carton, then out big box
- We also have vacuum heated bag to replace of PE bag, make better avoid moisture
Production quality control:
- We have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable
- Keep each record filament samples sent to customers, build a tracking able document
- When the filament put on shelf longer than half a year, we will dry the filament again