Language

Best 3D printing pen-3rd

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Beijing

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-22 03:54

  • Browse the number:

    61

Send an inquiries
Company Profile
Carlias Group Co.,Ltd
By certification [File Integrity]
Contact:

carlias(Mr.)  

Telephone:

Area:

Beijing

Address:

Room 2118, B wing, Guoli Building, Zhenzhong Road, Futian District, Shenzhen, Guangdong, China (518109)

Website:

http://carlias.net8006.com/

Categories

Product Details
Model Number: 3D pen-3rd Brand Name: carlias Key Specifications/Special Features: For your better experience, please read this manual before you use 3D pen. Specification:Spinning speed: adjustableHeating temperature: 160°-- 230°Power input: 12V, 3ANozzle diameter: 0.7mmReplaceable nozzle in case of any problem

Warning
Caution: The 3D pen should only be used with ABS plastic filament approved by us. Misuse of your 3D pen, changing your pen heating temperature, and/or use of non-approved filaments and adaptors may result in damage to your pen and injury to you, and will void your warranty.

Burn hazard. The tip of the 3D pen can become extremely hot. DO NOT touch the tip. DO NOT allow the tip near or in contact with flammable materials. Unplug it when not in use, allow the tip to cool down completely after use and before storing.

Keep out of reach of children under eight years old.

Do not use this appliance near bathtubs, showers, basins or other vessels containing

What you will find in the box:
1x 3D pen
1x power adapter (US, UK, AU, EUR)
3x 10M free filaments
1x user manual

Using your 3D pen:
Step 1: Connect your 3D pen to the power adaptor
Connect the power adaptor to the back of the 3D pen and plug it into a power source.
When the yellow LED turns on, the pen is in the preheat status.

Step 2: Allow your 3D pen to heat up before loading filament
Press the “wire feeding” button, so the red LED turns on. After 30 seconds, the red LED will turn into green, preheating is done and the pen is ready.

Step3: Load the pen
Insert the ABS filament into the “wire loading hole” which is at the end of the pen. Keep on pressing the “wire feeding” button, the material will be loaded by built-in motor. Hold till the plastic material comes out from the nozzle nip, so the material loading is finished.

Step4: Draw &adjust your speed
Keep pressing the wire feeding button and draw your 3D objects. The speed of extrusion is adjustable by speed controller. Releasing the button will cause the pen to stop extruding.

Note: The device will switch to standby mode if not being used over 5minutes. The LED light will be off. If you want to use it again, press the “wire feeding” button to restart.

Step5: Unloading filament
When you want to unload or change the filament, you should press the wire unloading button, you may need to adjust the speed controller.

Note: Unloading the filament after each use is highly recommended. You need to cut the material ending to smooth before loading.
Shipping Information:
  • FOB Port: Shenzhen
  • Lead Time: 2 - 4 days
  • Dimensions per Unit: 22 × 17 × 6.5 Centimeters
  • Weight per Unit: 0.5 Kilograms
  • Units per Export Carton: 30
  • Export Carton Dimensions L/W/H: 52 × 45 × 32.5 Centimeters
  • Export Carton Weight: 15 Kilograms
Main Export Markets:
  • Eastern Europe
  • North America
  • Western Europe